Hello From Detroit Multiscope Setup · John Noble · ... · 3 · 73 · 1

JohnNoble 3.31
...
· 
·  3 likes
Glad to find this group. Just started using a dual set up right now I run two separate rigs on the same target. I would tandem mount but my CGME won’t carry both scopes at least I don’t want to risk it!

I use a WO FLT132 for luminance (mostly Ha) and a Z61 for everything else. I have an ASI62000 MM on the 132 and a ASI2600 MM on the Z61. Gives roughly the same FOV.

For a travel rig I plan to mount the Z61 and a 200 mm lens on the Ioptron GEM28 in tandem.

Clear Skies 

John58E57F78-9F99-448F-A5D7-7BF4A59A7842.jpeg
Like
CCDMike 5.02
...
· 
Welcome!
This is a nice setup.
In your photo the sky seems covered with trees, though!
I hope this is not the case😉

Always CS
Mike
Like
JohnNoble 3.31
...
· 
Unfortunately it is but only to the East - I also have a miriad of power and cable lines to deal with. That said I find a way!!! 

The trees are getting a hair cut in a couple of weeks!
Like
Mau_Bard 2.11
...
· 
·  1 like
Hi John, and thanks for posting your configuration.
It is interesting the combination of different sensor sizes and directly proportional focal lenghts, in order to get similar FOVs. It's a smart idea!
All the best for 2022 and CS!

Mau
Like
 
Register or login to create to post a reply.