7.17
#...
·
|
---|
As it's in the subject, my file numbers start from 0000, while I'd like them to start from 0001 (like in an ASIAir). I've tried a 'Starting Sequence Number' but it doesn't work, whatever I type there, the NINA starts numbers from 0000 anyway. I use templates, so the NINA starts them from 0000 like usual, but if I work with saved sequences, then the numbers continue, like from a previous session and it's impossible to reset them. Did anyone solve it? C.S. Martha |
5.76
#...
·
|
---|
I am not a developer of NINA, if you want them to change it, you may want to try their discord channel. I am not where I can try right now, but if you reset a saved sequence (circle arrow at the top of the very top of the sequence) it might reset the count, not sure. I suspect you are going to get a reaction of "who cares what the numbers are". Since people cull during the sequence as well as afterwards, and (usually) everything has a date/time, I am not sure why the sequence matters, I have used NINA for years and just don't pay any attention to them. There are a LOT of plugins now, it's possible someone has one that does this, but a brief look I did not see any. But if you want the behavior changed and can make a good use case for their efforts, the developers are over on discord. |
5.76
#...
·
·
1
like
|
---|
I am told if you are on V2.x there should be a plugin called Starting Sequence that may do what you want. I cannot see it because I'm running V3.0. Whether or not the author plans to migrate to 3 I have no idea, so it may or may not be worth using. |
0.00
#...
·
|
---|
So you're saying you used the Starting Sequence Number plugin? If so, can you post a screenshot showing how you're using it? |
7.17
#...
·
|
---|
Thank you for your replies. This is how I understand the "start of a container where there are (...) SmartExposure instructions.". The value is "0" like always after dragging the template. I think I cannot place it just above the SmartExposure commands, because it will be performed plenty of times in a loop. |
5.76
#...
·
|
---|
Sorry, I can't see that plugin due to the older version, never used it. And I apologize after it was mentioned to me I didn't connect the dots to your having said you already tried it. I am curious how it knows which sequence to reset, since (at least in 3 not sure on 2?) there is a separate sequence number by filter. Does it reset them all? Sorry I can't help, good luck. |
7.17
#...
·
|
---|
Good question. I'll try to separate them somehow and will inform you. |
0.00
#...
·
|
---|
Move the instruction to right above the Smart Exposure instructions and see if that helps. |
7.17
#...
·
|
---|
It cannot be simpler, but doesn't work as well. I agree with you @Linwood Ferguson, it's not worth my precious time, I can live with numbers like 0000-0059. Maybe I'll find a solution in future. Thank you, guys, for your time and help. C.S. Martha |