Hi All, do you know if it is possible to correct sensor tilt with the TS2600? The 6 screws in front of the camera appear to me just fixing ones. Many thanks in advance for your help.
Mau
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Only with 3rd party hardware, afaik. Indeed the 6 screws aren't for tilting.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Thank you Andrea, this is what I suspected as well. Ciao, Mau
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Update: The TS2600-CP Generation 2, available from December 2023, with removable front plate, allows installing the OGMA Tilter https://getogma.com/products/OTIL26 , that can be operated from the rear, something that was natively possible only with the Player One cameras.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
to create to post a reply.